Putting Buitink Technology's Inflatable Lift System into use. How do I lift my boat for maintenance or inspection?

1. Inspection Before Use

• Check all parts of the system, including the tubes, air system, manifold with valves, and associated straps and slings.
• Make sure there is no visible damage or wear.

2. Positioning

Determine the best position for the boat or catamaran above the inflatable cushion(s).

• For a catamaran: Place one elevator cushion in the center under the boat.
• For a boat: Place two floats interconnected with straps/slings.

3. Connection Air System

• Connect the air system with automatic pressure control to the elevator pad or floats.
• Connect the manifold with valves to regulate the air supply to the tubes.

4. Blow up

• Start by slowly inflating the cushion or floats.
• Keep an eye on the position of the boat or catamaran during inflation. Make sure the boat is lifted evenly.
• Fill the floats with air until the boat or catamaran reaches the desired level above the water.

5. Maintenance or Inspection

• Perform the required maintenance or inspection while the boat or catamaran is floating above the water level.
• Make sure the boat is stable and safe during all operations.

6. Letting it sink in

• After completing maintenance, slowly release the air from the cushion or floats.
• Make sure the boat or catamaran descends and returns to the water evenly.

7. Storage

• When the boat or catamaran is safely back in the water, empty and fold the elevator pad or floats.
• Store all parts of the system in a dry and clean place.

Safety Tips

• Always provide a safe working environment. Never perform work under a boat or catamaran supported only by the inflatable elevator system without additional safety precautions.
• Check the system regularly for wear or damage.
• Avoid overloading the system; observe weight limits.